Adobe illustrator cs5 live trace tutorial free -
Looking for:
Adobe illustrator cs5 live trace tutorial free - |
How to edit artwork in Illustrator using Image Trace - Tracing options
This option is available only when Mode is set to Grayscale. Specifies a value for generating a black and white tracing result from the original image. All pixels lighter than the Threshold value are converted to white; all pixels darker than the Threshold value are converted to black. This option is available only when Mode is set to Black And White. Specifies a palette for generating a color or grayscale tracing from the original image.
This option is available only when Mode is set to Color or Grayscale. Automatically switches between the limited palette and full tone for the tracing, depending on the input image. When you select Automatic for your palette, you can adjust the Colors slider to alter vector simplicity and accuracy in the tracing. The value 0 means simplified at the expense of accuracy and the value means accurate or photorealistic at the expense of simplicity. Uses a small set of colors for the tracing palette.
You can use the Color slider to further reduce the colors selected. Uses the entire set of colors for the tracing palette. This option is the best for tracing photos and creates photorealistic artwork. With this option selected, the Color slider determines the variability of the pixels that make up each of the fill regions. When the Color slider is to the right, the variability is smaller, resulting in more paths defined by smaller areas of color.
On the other hand, when the slider is to the left, the fill areas are fewer and larger. Uses an existing color group for the tracing palette. This option allows you to define the exact colors you want in your traced artwork.
Controls the distance between the traced shape and the original pixel shape. Lower values create a looser path fitting; higher values create a tighter path fitting.
Specifies the emphasis on corners and the likeliness that a sharp bend will turn into a corner point. A higher value results in more corners. Tip : For a high-resolution image, move the Noise slider to a higher value for example in the 20—50 range to have some effect. For a low-resolution image, set it lower 1— Creates cutout paths. The edge of one path is exactly the same as the edge of its neighboring path. Specifies the maximum width of features in the original image that can be stroked.
Features larger than the maximum width become outlined areas in the tracing result. Specifies if slightly curved lines are replaced with straight lines and if lines near to 0 or 90 degrees are snapped to absolute 0 or 90 degrees. Tip : You can choose this option for geometric artwork or if shapes in your source image are slightly rotated.
However, you can make an editable copy of a default preset by selecting the preset and choosing Save As New Preset from the panel menu. Click the menu icon and choose Save As New Preset. From the drop down menu choose Template.
You will notice the image has become less visible dim. This is because we create this layer as a template for our artwork that we are about to do. Double click on the layer and change the dim percentage see below.
Create a new layer using the Create new layer button in the Layers panel. Double click on the new layer to open the Layer Options dialog box. To draw outlines of the figs, we would need a brush. We are using this brush for this tutorial, feel free to use any other brush or create your own brush if you like.
If you have a tablet, use your pen to draw else use the mouse. Adjust the stroke weight if required. And using a darker foreground color we have used black draw outlines and other details of the fruit. See image below:. The main thing is that you now have your art in vector form and can easily alter it in many creative ways. Here are a few brief suggestions for techniques that are useful:. An extension handy for anyone using Illustrator, Adobe Kuler puts a pallet of suggested and popular color combinations that can be added to the swatches panel.
This tutorial shows a way to create and load your own Kuler swatches from the Kuler website to your Illustrator library. Live Paint deserves a tutorial of its own, as there are many features; a quick mention is worth it here, because Live Paint can easily fill in shapes without having to alter the vector groupings:. Select your artwork and go to the Object menu. Select the Live Paint Bucket K and fill the cells with the desired colors. Great for playing with color combinations. This feature takes the existing colors and provides complimentary color options which can be viewed instantly.
Just the things you can actually use. Everything TypeScript, with code walkthroughs and examples. And other printed books. Email Newsletter Your smashing email. SmashingConf New York City For example, the eyes can be traced using the Ellipse Tool to draw circles, and for the body part, we can use a paintbrush to add details. Delete the background layer and fix the details if needed. You can edit the traced image and make it your own style.
The easiest way to trace an image is using the Image Trace feature because the tracing result is preset and you can always adjust the result from the Image Trace panel. If you want to make big changes to the original image, you can use Method 2. Your email address will not be published.
Thank you very much.. Illustrator is a design program made by Adobe Inc. This site is not associated with Adobe. As an Amazon Associate I earn from qualifying purchases. Skip to content.
How To Use Live Trace In Adobe Illustrator Cs5? – DW Photoshop
This article is relevant to Adobe Illustrator CS5 and earlier. While tracing an image, you can now choose from a wide variety of presets or use intuitive, easy controls to get premium results.
For details, see Image Trace. If you want to base a new drawing on an existing piece of artwork, you can trace it. For example, you can create a graphic based on a pencil sketch drawn on paper or on a raster image saved in another graphics program by bringing the graphic into Illustrator and tracing over it. The easiest way to trace artwork is to open or place a file into Illustrator and automatically trace the artwork with the Live Trace command.
You can control the level of detail and how the tracing is filled. When you are satisfied with the tracing results, you can convert the tracing to vector paths or a Live Paint object. To trace the image using a tracing preset, click the Tracing Presets and Options button in the Control panel, and select a preset.
To set tracing options before you trace the image, click the Tracing Presets and Options button in the Control panel, and choose Tracing Options. Set tracing options, and then click Trace. Specifies a value for generating a black and white tracing result from the original image. All pixels lighter than the Threshold value are converted to white, all pixels darker than the Threshold value are converted to black. This option is available only when Mode is set to Black and White.
Specifies a palette for generating a color or grayscale tracing from the original image. This option is available only when Mode is set to Color or Grayscale. To let Illustrator determine the colors in the tracing, select Automatic. To use a custom palette for the tracing, select a swatch library name.
The swatch library must be open in order for it to appear in the Palette menu. Specifies a maximum number of colors to use in a color or grayscale tracing result. This option is available only when Mode is set to Color or Grayscale and when panel is set to Automatic.
Output To Swatches. Blurs the original image before generating the tracing result. Select this option to reduce small artifacts and smooth jagged edges in the tracing result. Resamples the original image to the specified resolution before generating the tracing result. This option is useful for speeding up the tracing process for large images but can yield degraded results. Max Stroke Weight. Specifies the maximum width of features in the original image that can be stroked.
Features larger than the maximum width become outlined areas in the tracing result. Min Stroke Length. Specifies the minimum length of features in the original image that can be stroked.
Features smaller than the minimum length are omitted from the tracing result. Path Fitting. Controls the distance between the traced shape and the original pixel shape. Lower values create a tighter path fitting; higher values create a looser path fitting.
Minimum Area. Specifies the smallest feature in the original image that will be traced. For example, a value of 4 specifies that features smaller than 2 pixels wide by 2 pixels high will be omitted from the tracing result. Corner Angle. Specifies the sharpness of a turn in the original image that is considered a corner anchor point in the tracing result. For more information on the difference between a corner anchor point and a smooth anchor point, see About paths.
Specifies how to display the bitmap component of the tracing object. This view setting is not saved as part of the tracing preset. Specifies how to display the tracing result. Select Preview in the Tracing Options dialog box to preview the result of the current settings. To set the default tracing options, deselect all objects before you open the Tracing Options dialog box.
For a video on using Live Trace, see www. For a tutorial on tweaking Live Trace options for the best possible results, see www. A tracing object is made up of two components: the original source image and the tracing result which is the vector artwork.
By default, only the tracing result is visible. However, you can change the display of both the original image and the tracing result to best suit your needs. Click the Tracing Options Dialog button in the Control panel to view all tracing options. Adjust the options, and click Trace. Make sure that the swatch library is open, and click the Tracing Options Dialog button in the Control panel.
Select the swatch library name from the Palette menu, and click Trace. Tracing presets provide pre-specified tracing options for specific types of artwork. All the tracing options change for optimal tracing of a technical drawing: color is set to black and white, blur is set to 0 px, stroke width is limited to 3 px, and so on. Alternatively, select a tracing object, and click the Tracing Options Dialog button in the Control panel.
Set tracing options for the preset , and click Save Preset. Enter a name for the preset , and click OK. Click New , set tracing options for the preset , and click Done. Tip : To base a new preset on an existing preset, select the preset, and click New.
Select the preset, and click Edit or Delete. However, you can make an editable copy of a default preset by selecting the preset and clicking New. When you are satisfied with the results of a tracing, you can convert the tracing object to paths or to a Live Paint object. This final step allows you to work with the tracing as you do other vector artwork. Once you convert the tracing object, you can no longer adjust the tracing options. Use this method if you want to work with the components of the traced artwork as individual objects.
The resulting paths are grouped together. For example, if the display options are set to Outlines for the tracing result, then the expanded paths will be outlines only rather than filled and stroked. In addition, a snapshot of the tracing with its current display options is preserved and grouped with the expanded paths. Use this method if you want to preserve the tracing image as a guide for the expanded paths. Use this method if you want to apply fills and strokes to the traced artwork using the Live Paint Bucket tool.
For a video on tracing, see www. If you want to discard a tracing but keep the original placed image, you can release the tracing object. Template layers are locked, nonprinting layers that you can use to manually trace images. You can create template layers when you place an image or from existing layers. A new template layer appears below the current layer in the panel.
To trace an existing image, make sure the image is in its own layer, double-click the layer in the Layers panel, select Template , and click OK ; alternatively, select the layer and choose Template from the panel menu. The eye icon is replaced by the template icon , and the layer is locked. To turn a template layer into a regular layer, double-click the template layer in the Layers panel, deselect Template , and click OK. Legal Notices Online Privacy Policy. Adobe Illustrator Features What's New.
Buy now. Trace artwork. Open or place a file to use as the source image for the tracing. With the source image selected, do one of the following:. Optional Adjust the results of the tracing. Optional Convert the tracing to paths or to a Live Paint object. Tracing options. Specifies a tracing preset. Specifies a color mode for the tracing result. Max Colors. Creates a new swatch in the Swatches panel for each color in the tracing result. Creates filled regions in the tracing result. Creates stroked paths in the tracing result.
Change the display of a tracing object. Select the tracing object. Do any of the following:.
Comments
Post a Comment